Ask a question

Have a Question?

Tech Support also available at +1 (949) 852-1972

  • Product:
    TC8611
  • *
  •  
  • *
  •  
  •  
  • *
  • * Please enter the answer below



Please check for an email confirmation after submission.

TC8611

T1/E1 Redundancy Controller

TC8611
Rollover or Touch for Expanded View. Scroll to Zoom.

Features

The TC8611 T1/E1 Redundancy Controller adds 1+1 redundancy for an existing TDM Telecom infrastructure.

It duplicates the incoming host T1/E1 signal and transmits the signal over the primary and secondary T1/E1 lines.

TC8611 can be used along with TC3845-1 T1/E1-over-IP Gateway to allow one path to be over an Ethernet network while the other over a normal TDM connection.

The TC8611 interface card can fit into any available Mini Channel Bank housing option including 1S Standalone chassis and 1U/4U card cages.

  • 1+1 Redundancy over Primary and Secondary T1/E1 lines
  • Extreme Temp (-40°C to +80ºC) Optional
  • Built-in Power Redundancy
  • Meets or Exceeds IEC 61850-3, IEEE1613 & NEMA TS-2 Standards
  • Member of the Mini Channel Bank Product Family

Applications

The TC8611 is designed for networks that need T1 redundancy.

These networks have a primary and redundant secondary line typically used in critical communication applications like public transportation, police and fire, emergency response, and power utilities.

Typical application using the TC8611. Traffic passes through the Primary T1 unless a fault is detected at which point the traffic will be switched to the secondary T1:

TC8611 - T1 Redundancy Controller
Click to enlarge

Application showing the TC8611 used as a redundancy controller, with a T1 provided by a TC3845-1 T1 over IP controller:

TC8611 - T1 Redundancy Controller
Click to enlarge

Specifications

T1/E1
  1. T1 Interface
  2. ConnectorElectrical, RJ-48
  3. Line Termination100 Ohm, balanced
  4. Data Rate1.544Mbps
  5. Line CodeAMI, B8ZS
  6. E1Interface
  7. ConnectorElectrical, RJ-48
  8. Line Termination120 Ohm (balanced), 75 Ohm (unbalanced) via RJ-48 to BNC adapter cable
  9. Data Rate2.048Mbps
  10. Line CodeAMI, HDB3
System
  1. Bit Error Rate1 in 109 or better
Regulatory Approval
  1. CE, FCC Part 15, CISPR (EN55022) CLASS A, IEC 61850-3, IEEE 1613, NEMA TS-2

LEDs
  1. ALM, PWR A, PWR B, Vcc, SIG, AIS, BPV, LB

Power
  1. Standard12VDC
  2. Optional24VDC, -48VDC, 90-260 VAC, 50/60Hz
  3. Power Consumption<10W
Operating Temperature
  1. Hi-Temp (optional)-20°C to 70°C
  2. Extreme (optional)-40°C to 80°C
Storage
  1. Storage-40°C to 90°C
  2. Humidity95% non-condensing
Physical (Standalone Unit)
  1. Height(3.53cm) 1.40"
  2. Width(18.14cm) 7.20"
  3. Depth(24.89cm) 9.80"
  4. Weight(907g) 2.0lbs
Note: Information contained in this data sheet is subject to change without prior notice.

Ordering

For more information