Multiplexers Ethernet
Transporting combinations of Telephone, Serial, 600ohm Analog and/or Dry Contact over Ethernet Fiber.
These Ethernet multiplexers transports combinations of Serial, 600 ohm Analog, telephone, and more over Ethernet and is part of TC Communications' JumboSwitch® family. The JumboSwitch® product line can be managed remotely and is easy to integrate, maintain and rely on to keep working.
If you can't find a specific product you have, please visit the End of Life Products list.
The JumboSwitch® TC3850-1 is a 10G Multi-Service Layer 2 Switch supported in a modular chassis design with 2 open slots compatible with JumboSwitch® interface cards. It is MEF Carrier Ethernet 2.0 Compliant allowing network providers the ability to utilize Ethernet technology in network as well as providing Ethernet services to customers.
The TC3840-5 is a 2.5G Multi-Service Layer 2 Switch supported in a modular chassis design with 7 open slots in the 4U chassis, offering 2x SFP ports capable of speeds up to 2.5G for connecting up and down nodes to form a ring or bus topology. It’s part of the JumboSwitch® series, which is a TDM over IP/Ethernet based solution designed to emulate time-division multiplexing over packet switched networks (PSN).
The TC3840DR is a compact, efficient Industrial Ethernet switch solution with full JumboSwitch network compatibility and integrated Serial Server, Phone, or Ethernet card expandability. Our JumboSwitch® series offers a TDM over IP/Ethernet based solution designed to emulate time-division multiplexing over packet switched networks (PSN). TDM over IP/Ethernet is a TDM pseudowire (PW) technology making it possible to provision E1, T1, E3, T3, STS-1 and serial data services across PSN's such as IP, MPLS or layer 2 Ethernet Networks.
This industrial Ethernet switch is a small form factor and efficient
Industrial Ethernet solution with integrated serial server or Ethernet card expandibility.
The TC3841 is a 6-Port GigE card copper interface Ethernet switch that is fully featured allowing control over Security Network Configurations, Rate Limiting, VLAN and QoS.
The TC3842 is a 6-Port SFP GigE Switch that is compatible with both SFP optical and copper modules, supporting 850nm multi-mode and 1300/1550nm single mode.
The TC3844-1 is an Ethernet-over-T1/E1 card that connects a JumboSwitch® network or any third party Ethernet networks over existing T1/E1 circuits. The TC3844-1 is designed for bridging Ethernet LANs over an existing T1/E1 telecom network, extending Ethernet networks by utilizing TDM Telecom infrastructure (i.e., T1/E1 Landline, or T1/E1s/SDH Microwave Carrying T1/E1), demarcation between the carrier’s and customer’s networks, and for bonded transparent LAN service.
JumboSwitch® offers an Ethernet-over-T3/E3 interface card as a rugged device for connecting a JumboSwitch® or any third-party Ethernet network over existing TDM circuits.
The TC3844-5 is ideal for bridging Ethernet LANs between existing SONET/SDH networks, establishing demarcation points between carrier and customer networks, providing a low-cost IP migration path to SONET/SDH. And enabling bonded transparent LAN service.
This T1/E1 over IP device transports up to 4 channels of T1 or E1 over Layer 2/3 Ethernet networks with low latency. It is part of the JumboSwitch® series, a TDM over IP/Ethernet based solution designed to emulate time-division multiplexing over packet switched networks (PSN).
The TC3846-2 links or extends up to 2 channels of C37.94 circuits across Layer 2/3 Ethernet/IP, CE, or MPLS networks. It is easy to configure, offers extremely low latency, and supports point-to-point and point-to multi-point topologies.
The TC3846-6 links or extends up to 4 channels of 600-ohm 2/4-wire analog and dry contacts across Layer 2/3 Ethernet/IP, CE, or MPLS networks. For cost savings and scalability, units can be ordered with only 1 or 2 channels of analog and dry contacts, and later expanded in the field to 2 or 4 channels.
The TC3847-1 Serial Server interface card is compact and simple to configure and designed to transport four channels of RS-232 or RS-422/RS-485 data over existing Layer 2/Layer 3 Ethernet networks.
Compact and efficient, the TC3847-1DR is fully managed Industrial Ethernet switch solution with full JumboSwitch® network compatibility and integrated Serial Server supporting transport of four channels of RS-232 or RS-422/RS-485 data. An all-in-one connectivity solution for industrial automation and commercial network applications, the TC3847-1DR benefits users by offering Managed Ethernet Switch with 4-channel Serial Server.
The TC3847-3 Turbo Serial Card features support for teleprotection relays, and transports four channels of RS-232 or RS-422/ RS-485 serial data over existing Layer 2/Layer 3 networks at extremely low latency.
The TC3847-4 RS-422 Gateway Card features support for teleprotection relays and transports 2 channels of RS-422 Sync serial data over existing Layer 2/Layer 3 networks. It is part of the JumboSwitch® series.
The TC3847-5 is ideal for users needing to extend dry contacts across existing Layer 2/Layer 3 networks and low latency is an important requirement. It is part of the JumboSwitch® series.
The TC3847-6 dry contact closure monitoring interface card works with the TCView® network management system to display remote closure status at the central TCView server site. It is part of the JumboSwitch® series.
The TC3847-7 links or extends up to 2 channels of RS-422 serial (asynchronous with control or synchronous) across Layer 2/3 Ethernet/ IP, CE, or MPLS networks. It is easy to configure, offers extremely low latency, and supports point-to-point and point-to-multipoint topologies. The TC3847-7 is part of the JumboSwitch® series.
The TC3848-1/-2 is a complete, VoIP+ telephony solution that merges the simplicity of Ethernet with the call processing features of PABXs into one compact interface card. With no central hub required, the TC3848-1/-2 utilizes VoIP technology to become a self-contained phone system/product. It is part of the JumboSwitch® series.
The TC3848-3/4 Modem Over IP is compatible with CCITT and Bell data modem standards, and is easy to configure and offers extremely low latency. It is part of the JumboSwitch® series, a TDM over IP/Ethernet based solution designed to emulate time-division multiplexing over packet switched networks (PSN).
End-of-Life Products
The JumboSwitch Main (TC3840-1) and Management (TC3840-2) plug-in cards provide layer 2 switching functionality and the central switching fabric for JumboSwitch interface cards. Each 2U/4U chassis must include both a Main and a Management card to function properly.
Designed specifically for 2U chassis options, the JumboSwitch Main
(TC3840-4) and Management (TC3840-2) plug-in cards provide
layer 2 switching functionalities and the central switching fabric for
JumboSwitch interface cards. Each 2U chassis must include both a Main
and a Management card to function properly.
The TC3840-3 JumboSwitch Main/Management “Combo” Card provides layer 2 switching functionalities and is the central switching fabric for JumboSwitch Interface cards. It offers 4 x 10/100/1000 Copper Ports and 2 x SFP Gigabit Ports for connecting up and down nodes to form a fiber/copper ring or bus topology. For the smaller 1U and 2S chassis options, a single Main/Management/Switch "Combo" Card is used.
This T3/E3 over IP Gateway transports a single T3 or E3 circuit over Layer 2/3 Ethernet networks with low latency.
Typical applications for the TC3846-1 include extending G.703 circuits across IP networks and extending Teleprotection relays with a G.703/64K interface over existing Layer 2 / Layer 3 Networks.