Ask a question

Have a Question?

Tech Support also available at +1 (949) 852-1972

  • Product:
    TC8714-2
  • *
  • *
  •  
  • *
  •  
  •  
  • *
  • * Please enter the answer below



Please check for an email confirmation after submission.

TC8714-2

4-Wire E&M Analog & Dry Contact Gateway Channel Bank

TC8714-2
Rollover or Touch for Expanded View. Scroll to Zoom.

Features

The TC8714-2 is a 2-channel 2-/4-Wire E&M Gateway Channel Bank that allows network managers the flexibility of leveraging their existing T1/ E1 circuits by adding low cost analog or dry contact links as needed. It is economical, simple to install and comes standard with built-in power redundancy.

A low cost and immediate solution, the TC8714-2 is typically used to link or extend various 600 Ohm analog, audio and intercom devices (e.g. FSK modems, E&M, teleprotection relay controllers, etc.), and dry contacts over existing T1/E1 links.

  • Up to 2-ch 600 Ohm Analog & Dry Contact
  • 2-Wire or 4-Wire Analog
  • ESF/SF Framing Support for T1
  • PCM30/PCM30C Framing Support for E1
  • Very Low Latency
  • Dry contact detectors with Isolated Ground
  • Compatible with all dispatch consoles
  • Built-in Power Redundancy
  • Rackmount or Standalone
  • Extreme temp (-40°C to +80°C) optional

Applications

The primary use of the TC8714-2 is for the replacement of exisiting channel banks.

The TC8714-2 is specifically designed for remote sites with limited connectivity and providing a simple and cost effective solution

TC8714-2 - 4W Analog Channel Bank
Click to enlarge

Specifications

Connection Capacity
  1. Analog (2/4 Wire)2 Ports
  2. Bi-Directional Dry Contact2 Ports
  3. T1/E11 Port
Electrical
  1. Analog Interface
  2. Impedance600Ω
  3. Signal range-36.5 to +4.5 dBm
  4. Frequency band300 to 3400Hz
  5. ConnectorRJ11
  6. Dry Contact Interface
  7. Normal openstandard
  8. Normal closeoptional
  9. Max Load Voltage60V
  10. Continuous load current0.55A
  11. Peak load current1.2A
  12. Detector max input voltage9V
  13. ConnectorRJ11
  14. T1 Interface
  15. Line CodeAMI / B8ZS
  16. FramingESF, SF
  17. Standards.AT&T TR-62411, G.703, G.704, G.824, ANSI T1.403
  18. Connector.RJ48
  19. Impedance100Ω
  20. E1 Interface
  21. Line CodeAMI / HDB3
  22. FramingPCM30, PCM30C
  23. Standards.G.703, G.704, G.706, G.732, G.823
  24. Connector.RJ48, BNC
  25. Impedance120Ω, 75Ω
Visual Indicators
  1. Unit StatusPWR A, PWR B, Vcc, ALM
  2. AnalogTX, RX
  3. Dry ContactRLY, DET
  4. T1/E1AMI, RAI, AIS, CRC, BPV, LOS, SYNC
Power
  1. Standard12VDC @200mA
  2. Optional24VDC, -48VDC, 125VDC, or 100/240VAC 50-60Hz
  3. Power consumption<10W
Operating Temperature
  1. Standard-10°C to 50°C
  2. Hi-Temp (optional)-20°C to 70°C
  3. Extreme (optional)-40°C to 80°C
Storage
  1. Temperature-40°C to 90°C
  2. Humidity95% non-condensing
Physical (Standalone Unit)
  1. Height(3.53cm) 1.40"
  2. Width(18.14cm) 7.20"
  3. Depth(24.89cm) 9.80"
  4. Weight(907g) 2.0lbs

Literature / News

Ordering

For more information

Request details
Datasheet
Have a question?