Transportation & Traffic Control
 

  • Multi-Service Access Platform
  • Proven Network Vendor Since 1992
  • Sophisticated Redundant Ring Schemes
  • Industrial-Hardened (-40° to +80°)
  • Exceeds NEMA TS-2 & Caltrans Traffic Specs  
  • All Popular Interfaces & Power Options
  • Distances to more than 100 km



Overview

TC Communications specializes in integrated Ethernet, Voice and Data solutions for fiber optic networks in transportation and traffic control applications.  Together or singly these products combine to handle all popular applications including connecting Central Control rooms with various remote traffic devices including Programmable Logic Controllers (PLCs), Intelligent Electronic Devices (IEDs), and surveillance cameras.

JumboSwitchTM Multi-Service Access Platform


Featured Products

JumboSwitchTM  -  TC's featured product for traffic control and transportation applications is its new flagship Gigabit Ethernet Multi-Service Access Platform (MSAP), the JumboSwitchTM product Family.

  • Integrates Ethernet, Voice & Data
  • Latest IP & TDM over IP Technology
  • Low Cost Alternative to SONET/SDH
  • Future Proofs Network Design
  • Minimum Real-Time Latency
  • Simplifies Drop & Insert


The center piece of the JumboSwitch family is a fully-managed and easily scalable Gigabit Ethernet switch that integrates up to seven hot-swappable Ethernet, Voice & Data interface cards onto a Gigabit backbone Ethernet fiber optic network.

Alternative to SONET/SDH

Based on the most advanced Ethernet/IP, VoIP and TDMoIP technologies, the JumboSwitch MSAP family offers an efficient, low cost alternative to
SONET/SDH network solutions for many applications, and promises straight-forward and simple scalability for any network topologies and sizes.

Compared to the complicated hierarchies of SONET or SDH based systems, the JumboSwitch drastically reduces operational expenses since it totally eliminates unnecessary hardware layers, thus significantly lowering the skill level required for installation, maintenance and troubleshooting. 

In the past, SONET and SDH communication systems were the only choices when it came to building mission critical automation and control systems. But, progress in the control, computing and communication technologies has made these TDM based communication systems basically obsolete. The trend is moving towards Ethernet/IP based communication backbones.

Supports Existing Legacy Products

The JumboSwitch makes communication network design extremely easy and straight forward.  Legacy equipment, e.g. T1/E1, T3/E3, RS-232/RS-485, can co-exist harmoniously on the same platform with more advanced technologies including Ethernet, GigE fiber ports, Turbo Serial for protective relay communication, and LANex, a virtual VoIP PBX without the need of additional Call Managers or SIP Servers.

Management, networking and security features are extensive and include STP, RSTP, SNMP (v1& v2), VLAN, IGMP Snooping, Port Rate Control, QoS, etc.  The JumboSwitch supports all popular topologies including redundant ring, bus, string, star and add/drop multiplexing.  It is available in 2U and 4U (rack) versions. With TC’s proprietary self healing technology, the recovery time for JumboSwitch fiber rings is less than 50ms for any number of nodes.

Configurations are flexible and easily determined by network engineers. For example, it could be configured as a 10/100/1000Mbps Ethernet 42-port redundant ring switch with any combination of fiber or copper ports.  Or, it could be configured with 12 channels of Ethernet, 8 channels of T1/E1, 8 channels of phone and 4 channels of RS-232.

The JumboSwitch's unique VoIP–LANex package,
LAN exchange, enables all VoIP phones ( if less than 100) to work the same as extension lines connected to a virtual PABX, providing basic but reliable call processing functions without the need of additional Call Managers or SIP Servers.

 

 (TC3820)  TC also features a redundant ring Gigabit Ethernet Switch.  The TC3820 provides automatic switchover to a secondary data path within 38 msec to insure network integrity despite fiber optic cable faults or equipment failures. In addition to adding maximum reliability, it can easily accommodate dozens of surveillance cameras without affecting other network traffic and is available Industrial Hardened.  It complies with IEC 61850 & IEEE 1613 standards.
 


Industrial Hardened & Industrial Ethernet for Extreme Environments
“Industrial Hardened”
and “Industrial Ethernet” describe communications products designed to operate in industrial process control environments or geographical locations where harsh conditions are common. Typical installations include Power Substations, Utilities, Manufacturing Plants, Oil & Gas Installations, Water Treatment Plants, Traffic Signal Control Systems, etc.

To meet this level of durability, “Industrial” grade (synonyms for “industrial” commonly include “rugged,” “outdoor,” “hardened,” and “substation hardened”) communications products are manufactured with special components, connectors and circuitry. This ensures reliable operation in the event of wide temperature swings, electromagnetic interference (EMI), radio interference, vibrations, or moisture and humidity fluctuations.  Conformal coating is optional.

TC Communications Industrial Grade products are designed to exceed pertinent industry specifications.  For example, communications equipment used in power substations are subject to extremes of temperature and humidity, as well as electrical transients from high voltage switching.  These environmental conditions are described in industrial standard specifications IEC 61850-3 and IEEE 1613 for networking devices.  Similarly, equipment used for traffic control applications are required to withstand roadside vibration in addition to high/low heat and humidity.  Testing standards pertinent to traffic control are described in the environmental requirements of the NEMA TS-2 standard.

TC Communications’ extensive Engineering Department features a variety of sophisticated on-site testing equipment to verify that its Industrial Grade products meet the most demanding environmental and EMI requirements.

Every TC Communications product passes through “live operating temperature” testing (unlike randomly selected products for statistical sampling) before it is shipped.  Each unit is connected to an operating BER tester to ensure error-free operation while the temperature chamber cycles from -40 C to 80 C during the 24 hour testing period.

            

Top


Information Request Form                

Select the items that apply, and then let us know how to contact you.

Send product literature      Model:  
Have a salesperson contact me

      Name: 
     Title: 
   Company: 
   Address: 
    E-mail: 
     Phone: 
       FAX: 
  Comments: 
I Initially heard of TC Communications from:

  Google.com
  Yahoo.com
  MSN.com
  AOL.com
  Referral
  Magazine

  Other

                                 Top


© 2008, TC Communications, Inc.  All rights reserved.
17881 Cartwright Road - Irvine, CA 92614,
Tel:(949)852-1972, Sales:(800)569-4736 
Fax:(949)852-1948, sales@tccomm.com

Page Last Updated: 03/13/2008