Applications
Typical
applications include extending voice, video and data across IP networks.
For example, the TC3845S is used to extend T1/E1 links between PBX's,
connect video conferencing, or link Cell Towers to Central Offices.
Top
Description
Featuring extremely low latency, the new Model TC3845
T1/E1-over-IP-Gateway brings another level of flexibility to IP
network connectivity. It transmits 1-4 channels of T1/E1, or any
combination, over Layer 2/3 networks in point-to-point or
multi-point applications.
Compact and simple to configure, the TC3845 achieves absolute
minimal latency (end-to-end processing delay) by using
high-performance buffering and forwarding technology.
Each T1/E1
channel is independent and transparent to protocols and signaling
that run over T1/E1. All applicable standards and line codes are
supported. For proper functionality, each T1 and E1 channel utilizes
6Mbps and 8Mbps of bandwidth, respectively.
Key features include Traffic Monitoring and Statistics, Network Time
Server (NTS), Remote Firmware Upgrade, and Temperature Monitoring.
the TC3845S also offers Rate Limiting on bandwidth utilization and
supports QoS for packet prioritization.
Setup, diagnostics, and management are accessed via Web, SNMP,
Serial Console, and Telnet. Diagnostics include LED indicators and local and remote loopback to assist with
troubleshooting and maintenance.
Power redundancy is standard. Both a high temperature version (-20°C
to +70°C)
and a extreme temperature version are available (-40°C to +80°C).
Standard configuration is a 1U high standalone chassis. Power
options are 12, 24, -48VDC or 115/230 VAC.
Top
Technical
Specifications
| Data
Rates |
| T1 |
1.544 Mbps |
| E1 |
2.048
Mbps |
|
Ethernet |
10/100 Mbps (100M on fiber side) |
|
Console Port |
9.6K |
| Channel
Capacity |
|
T1, E1 |
4 Channels |
|
Ethernet |
2 Ports |
| Electrical |
|
T1 Line Code |
AMI, B8ZS |
| T1
Standards |
AT&T TR-62411, G.703, G.704,
G.824, ANSI T1.403 |
|
T1
Connector |
RJ-48 |
|
T1
Impedance |
100 Ohm |
|
E1
Line Code |
AMI, HDB3 |
|
E1
Standards |
G.703, G.704, G.706, G.732,
G.823 |
| E1
Connector |
RJ48, BNC via cable |
|
E1
Impedance |
75, 120 Ohm |
|
Ethernet
Standards |
IEEE 802.3, 802.3u, 802.1p&Q |
|
Ethernet
Connector |
RJ-45 |
|
Ethernet Console Port |
RJ-45 |
| |
|
| System
|
| Bit
Error Rate |
1
in 1010
or better |
| Visual
Indicators |
| System
LEDs |
PWR (A, B) Alarm, Vcc, CS, MS |
| Channel |
Status |
|
Ethernet |
Link/Act |
| Diagnostic
Functions |
| Local
and Remote Loopback for T1/E1 & Ethernet |
| Power |
| Standard |
12 VDC |
| Optional |
24VDC,
-48VDC, 90-260 VAC, 50/60 Hz |
|
Power Consumption |
<10w |
|
Operating Temperature
|
|
Normal |
0C° to 70Co (optional) |
|
Extreme |
-40C° to
80°C |
|
Storage Temperature
|
|
Normal |
-40C° to 90°C |
| Humidity |
95% non-condensing |
|
Physical |
| Height |
(3.89
cm) 1.53" |
| Width |
(18.54 cm) 7.3" |
| Depth |
(24.67
cm) 9.79" |
| Weight |
(0.4
kg) 1.0 lbs. |
|
|
