Applications
The TC3105 UTP-to-Fiber Optic Converter
is frequently used to link Ethernet switches or workstations.
Typical applications include extending Full Duplex LAN segments up to
80km or connecting two Ethernet segments via fiber optic cable.
Top
Description
The TC3105 UTP-to-Fiber Optic Converter
replaces or extends 10Base-T segments with multimode (850/1300nm) or
single mode (1300/1550nm) fiber optic cable. It is fully compliant with
IEEE 802.3 10Base-T and 10Base-FL standards. Specifically designed for
long distances, the TC3105 can extend LAN segments up to 80km, depending
on fiber size, quality, wavelength and connectors. The standard optical
loss budget is 15dB*. Features include automatic UTP Polarity
Correction, a slide switch for UTP uplinks or downlinks and six LED
indicators to aid installation and troubleshooting procedures:
|
"PWR" |
- |
DC Power Supply
Indicator |
|
"PODIS" |
- |
Polarity Status |
|
"LTF" |
- |
Link Test Fine |
|
"OP" |
- |
Optic Reception
Indicator |
|
"TP" |
- |
UTP Reception Indicator |
|
"LMON" |
- |
Optic Link Monitor |
The TC3105 works with all popular sizes of
single mode and multimode fiber optic cable. Fiber optic connectors are ST
or FC. Power is 12VDC or 115/230VAC with an external power cube. It is
available in wallmount or standalone versions and is packaged in a compact (3
/4" x 41 /8" x 21 /2") sheet metal case. The rackmount
version is Model TC3105R. An extreme temperature version (-20° to 70°C),
Model TC3105T, is also available.
*Contact factory for higher requirements.
Top
Technical
Specifications
| Data
Rate |
| up
to 10 Mbps |
| Optical |
| Transmitter |
ELED,
ELED |
| Receiver |
PIN
Diode |
| Wavelength |
850nm,
1300nm Multimode
1300nm, 1550nm Single Mode |
| Fiber
Optic Connectors |
ST
or FC |
Loss
Budget*
(850nm, 1300nm) |
Multimode
(62.5/125µm): 15dB
Single Mode (9/125µm): 15dB |
| Electrical |
| Connector |
(UTP)
RJ45 Female |
| System
|
| Bit
Error Rate |
1
in 109
or better |
* Contact factory for higher requirements
|
|
| Visual
Indicators |
| Power
Status |
PWR |
| UTP
Signal Status |
PODIS,
TP, LTF |
| Optic
Signal Status |
OP,
LMON |
| Power |
| Standard |
12VDC
@ 300mA (max) |
| Optional |
115/230VAC (with external power cube) |
|
Temperature
|
| Operating |
-10° to
50°C |
| Hi-Temp
(optional) |
-20° to 70°C |
| Storage |
-40° to 90°C |
| Humidity |
95% non-condensing |
| Physical
(Wallmount Base Unit)
(Details) |
| Height |
(2.24
cm) 0.88" |
| Width |
(10.05
cm) 3.96" |
| Depth |
(7.76
cm) 3.06" |
| Weight |
(93.6
gm) 3.3 oz. |
|
|
