TC8800S/R
Telephone, Analog & Data Fiber Optic Multiplexer (2-28 ch.)
Features
The TC8800 Fiber Optic Multiplexer makes it possible to extend up to 28 telephone, data & analog channels to remote network sites. Its 4-to-28 channel Telephone & Data Fiber Optic Multiplexer links or extends data and telephone lines in campus networks.
- Up to 28 Telephone Lines and/or 2/4-wire 600 Ohm Analog, RS-232, RS-422, TTL, Dry Contact Closure, Dry ContactDetector
- 2-Wire Analog PBX and Key System Compatible
- Multimode or Single Mode (850/1300/1550nm)
- Built-In Power Redundancy
- Optical Redundancy (optional)
- Hi-Temp & Extreme Temp (optional)
- Hot Swappable Rackmount Cards
- Tested and Compatible with:
The TC8800 is typically used to link or extend data and telephone lines in campus networks. In many instances, it can replace expensive channel banks.
Applications
The TC8800 is typically used to link or extend data and telephone lines in campus networks. In many instances, it can replace expensive channel banks.
Specifications
Audio Bandwidth
- Telephone300 Hz to 3.4 Khz
- 2/4-wire Analog300 Hz to 3.4 Khz
- Async RS-232, RS-422, TTL, or Dry Contact Closure/Detector Data RatesUp to 19.2 Kbps
- TC8800S4 or 8 Channels
- TC8800R4, 8, 12, 16, 20, 24 or 28 Channels
- TransmitterLED/ELED
- ReceiverPIN Diode
- Wavelength850/1300nm MM, 1300/1550nm SM
- Fiber Optic ConnectorsST, FC
- Loss Budget * - 850/1300/1550nm
- Multimode @ 62.5/125µm15dB
- Single Mode @ 9/125µm20dB
- ConnectorRJ11 Female
- Bit Error Rate1 in 109 or better
- Power A & B, Vcc, FXS-0, Tx, Rx,Monitor, Optic-Rx, Sync, TxFCLK,LOCLB, RMTLBYes
- For each channelTx, Rx, Ring, Hook
- Standard12VDC
- Optional24, -48VDC, or 115/230VAC*
- Operating-10°C to 50°C
- Hi-Temp 1 (optional)-20°C to 70°C
- Hi-Temp 2 (optional)-40°C to 80°C
- Storage-40°C to 90°C
- Humidity95% non-condensing
- Height(3.18 cm) 1.25"
- Width(15.06 cm) 5.93"
- Depth(21.84 cm) 8.60"
- Weight(477 gm) 1.05 lbs
* Contact factory for higher requirements