TC3400/3420
Serial-to-Ethernet Converter (10BaseT)
Features
The TC3400 Serial-to-Ethernet Converter series is ideal for connecting surveillance cameras with RS-232 interfaces over Ethernet. It is also frequently used for poll/response networks in Utility, SCADA, Traffic Control and Process Control LANs to link RS-232, RS-422 or RS-485 RTUs and PLCs to a Host CPU.
The Model TC3400 is for point-to-point network applications, the Model TC3420 is for point-to-multipoint (poll/response). Both models are transparent to data or communications protocols and the TC3420 can be configured in bus, ring or redundant ring topologies.
- Converts RS-232, 422, or 485 to 10Base-T Ethernet (IEEE 802.3)
- Point to Point (TC3400)
- Point to Multi-Point (TC3420)
- Data Rates up to 57.6 Kbps
- Changeable Network Settings
- Supports Full RS-232 Handshaking
- Nine Diagnostic LEDs
- Local/Remote Loopback & Test Signal Generator (TC3420)
- High Temp (-20°C to 70°C) Optional
Applications
The TC3400 Series is ideal for poll response networks often used in Utility, SCADA, Traffic Control and Process Control LANs to link RS-232 or RS-485 RTUs and PLCs to a Host CPU. It is also ideal for connecting surveillance cameras with RS-232 interfaces over Ethernet.
Specifications
- RS232DB9 Female
- RateUp to 57.6Kbps
- RS485/RS422Terminal Blocks
- RateUp to 57.6Kbps
- Ethernet (10Base-T)RJ45 Female
- Rate10Mbps
- System StatusPWR A, PWR B, Vcc, ALARM
- Diagnostic StatusDHCP, DFLT, LOCLB, SERIAL, TELNET, MASTER, SLAVE
- Serial Signal StatusTX, RX, RTS, CTS, DTR, DSR, DCD
- TC3400Local Loopback
- TC3420Local/Remote Loopback
- TC3420Signal Generator
- Dry ContactNormal OPEN
- Standard12VDC @500mA
- Optional24, -48,125 VDC or 115/230VAC with Power Cube
- Operating-10°C to 50°C
- Hi-Temp(optional)-20°C to 70°C
- Storage-40°C to 90°C
- Humidity95% non-condensing
- Height(3.53 cm) 1.39"
- Width(18.13 cm) 7.14"
- Depth(16.59 cm) 6.53"
- Weight(558.6 gm) 1.23 lbs